Wright Bandmaster
Service of an amplifier with a reported intermittent low-output problem.
Customer report
The customer reported lower-than-expected output.
What I observed
At first the output seemed normal. Pulling on the input jack and moving the plug reproduced the problem. That pointed toward the input contacts, but I could not isolate one contact as a definitive cause.
Service performed
I cleaned the input jacks, pots, and tube sockets and re-tensioned the ground contacts on the input jacks.
Final check
I could not reproduce the symptom afterward. As far as I could tell, the amp was back to normal, and the customer did not report the problem again.
